The Onboard Monitoring Box (OMB) is a passive acquisition and monitoring device, developed by ERTMS Solutions. The non-disruptive approach works by collecting real-time messages that are exchanged between various ERTMS OBU sub-systems (such as the EVC, JRU, and STMs) and transfers this information to a configurable application software.

 

Benefits

  • Quick detection and analysis of potential disturbances on ETCS infrastructure
  • Fewer impacts on traffic during the failure of a balise or an LEU
  • Daily updates on ETCS infrastructure status
  • Higher grade of automatic infrastructure control
  • Improved punctuality
null

GSM/GSM-R modem

null

Embedded GPS

null

Uploads JRU data to central server for train monitoring

null

Real-time monitoring of EVC-JRU links

null

Wi-fi for: data upload in depots, software updates, flexible firmware

“ERTMS Solutions has supplied INFRABEL with a total of 5 units of On-board Balise Monitoring Tool. These instruments are installed on passenger trains Siemens Desiro. Installing the systems on a series of vehicles in commercial service allows Infrabel to obtain maximum coverage of the railway network.”
infrabel

The On-Board Balise Monitoring Tool (OBMT)

ERTMS Solutions has equipped passenger trains Siemens Desiro with a total of 5 On-board Balise Monitoring Tool system (OBMT).

Infrabel needed a tool able to:

  • provide real-time monitoring of ETCS telegrams from the onboard system
  • monitor their status
  • report the information directly to the General Maintenance System of Infrabel
  • maximize coverage of the railway network

Any potential or manifested problem generates an alarm that triggers a maintenance activity inside INFRABEL maintenance systems.

CAF Signaling chose the Onboard Monitoring Box

We have used it very intensively both in the lab and in the early testing in the field.
It is very important when you integrate different systems that you can see what is going on in the interface.

caf

OTHER PRODUCTS

ERTMS ERTMSCamCorder

ERTMSCamCorder

The ERTMSCamCorder is the essential on-site testing tool that allows full and synchronized recording, replay and reporting of all trackside and onboard data.

ERTMS TrackCircuitLifeCheck

TrackCircuitLifeCheck

The TrackCircuitLifeCheck is a versatile measurement instrument that facilitates track circuit maintenance and is usable on both diagnostic and commercial trains.

ERTMS BaliseLifeCheck

BaliseLifeCheck

The BaliseLifeCheck is a preventive balise measurement instrument that can be used on both diagnostic and commercial trains.

OTHER PRODUCTS

ERTMS ERTMSCamCorder

ERTMSCamCorder

The ERTMSCamCorder is the essential on-site testing tool that allows full and synchronized recording, replay and reporting of all trackside and onboard data.

ERTMS TrackCircuitLifeCheck

TrackCircuitLifeCheck

The TrackCircuitLifeCheck is a versatile measurement instrument that facilitates track circuit maintenance and is usable on both diagnostic and commercial trains.

ERTMS BaliseLifeCheck

BaliseLifeCheck

The BaliseLifeCheck is a preventive balise measurement instrument that can be used on both diagnostic and commercial trains.